top of page
Bùird Osteometric agus Calipers Spreading
Lab Osteometric Board
$1100.00
Features 1" thick acrylic base sheet and Kydex vertical measurement planes for extreme durability.
Constructed of acrylic, aluminum, brass, and stainless steel.
Provides the durability and accuracy required for years of reliable service.
Provides unparalleled linear tracking and fluidity of motion.
Measurement is accomplished via a linear scale (1/2 mm increment) mounted and indexed to the rear of the board.
End planes are removable for ease of shipment and storage.
ASME standardized.
Do not use the mounted scale alone to measure mid-shaft. The scale is offset to compensate for the thickness of the measuring plates and mounting point.
If you need a mid shaft measurement, ask us about what ruler to order.
Features 1" thick acrylic base sheet and Kydex vertical measurement planes for extreme durability.
Constructed of acrylic, aluminum, brass, and stainless steel.
Provides the durability and accuracy required for years of reliable service.
Provides unparalleled linear tracking and fluidity of motion.
Measurement is accomplished via a linear scale (1/2 mm increment) mounted and indexed to the rear of the board.
End planes are removable for ease of shipment and storage.
ASME standardized.
Do not use the mounted scale alone to measure mid-shaft. The scale is offset to compensate for the thickness of the measuring plates and mounting point.
If you need a mid shaft measurement, ask us about what ruler to order.
Field Osteometric Board
$799.00
-Composed of high impact Plexiglas and aluminum
-Reduced weight by over 70% compared to older boards.
-The Field Osteometric board features the same measurement method as the Laboratory Osteometric Board minus the rod and bearing assembly
-Collapsible to 12" x 6.5" x 1 1/2".
-Scales are laser etched directly onto the board's base along with guide lines (cm).
-Constructed of mostly Plexiglas.
-Board can be customized with your name or identification mark at no extra cost.
-ASME standardized.
-Composed of high impact Plexiglas and aluminum
-Reduced weight by over 70% compared to older boards.
-The Field Osteometric board features the same measurement method as the Laboratory Osteometric Board minus the rod and bearing assembly
-Collapsible to 12" x 6.5" x 1 1/2".
-Scales are laser etched directly onto the board's base along with guide lines (cm).
-Constructed of mostly Plexiglas.
-Board can be customized with your name or identification mark at no extra cost.
-ASME standardized.
Bòrd Osteometric Achaidh: Deasachadh nan Oileanach
$60.00
-Cruinn gu .5mm
- Dèanta de 1/4" - Black Laser Etched Acrylic.
- uachdar tomhais nas cumhainge (na bòrd àbhaisteach) agus gun phlèanaichean tomhais dìreach aonaichte.
- Bidh thu a’ toirt seachad na h-uachdaran tomhais dìreach (eisimpleirean: leabhraichean còmhdach cruaidh, blocaichean fiodha, msaa).
- Roinnte ann an dà phìos airson so-ghiùlain
-ASME àbhaisteach.
- A’ tighinn le caol microfiber airson glanadh agus stòradh.
-Cruinn gu .5mm
- Dèanta de 1/4" - Black Laser Etched Acrylic.
- uachdar tomhais nas cumhainge (na bòrd àbhaisteach) agus gun phlèanaichean tomhais dìreach aonaichte.
- Bidh thu a’ toirt seachad na h-uachdaran tomhais dìreach (eisimpleirean: leabhraichean còmhdach cruaidh, blocaichean fiodha, msaa).
- Roinnte ann an dà phìos airson so-ghiùlain
-ASME àbhaisteach.
- A’ tighinn le caol microfiber airson glanadh agus stòradh.
Spreading Calipers
$525.00
Based on the same dimensions and design as the classic instrument that has been used by anthropologists since the beginning of last century but updated with modern materials and utilizing state of the art manufacturing techniques.
Main body is machined out of aircraft grade 1/4 inch aluminum plate.
Scale is machined stainless and permanently laser engraved 0 - 30 cm in 1mm increments.
Measuring surface options:
Ground stainless steel ball ends
Assure accuracy after long term use
Prevent damage to the measured specimen.
Ground pointed ends
For precise measurement.
Joint surface utilizes a stainless steel contact plate to afford even friction along the measurement range eliminating the need for a thumb lock.
Entire unit weighs in at less than 5 and 1/2 ounces.
Main body dimensions are 12" x 4" when closed.
ASME standardized.
Based on the same dimensions and design as the classic instrument that has been used by anthropologists since the beginning of last century but updated with modern materials and utilizing state of the art manufacturing techniques.
Main body is machined out of aircraft grade 1/4 inch aluminum plate.
Scale is machined stainless and permanently laser engraved 0 - 30 cm in 1mm increments.
Measuring surface options:
Ground stainless steel ball ends
Assure accuracy after long term use
Prevent damage to the measured specimen.
Ground pointed ends
For precise measurement.
Joint surface utilizes a stainless steel contact plate to afford even friction along the measurement range eliminating the need for a thumb lock.
Entire unit weighs in at less than 5 and 1/2 ounces.
Main body dimensions are 12" x 4" when closed.
ASME standardized.
Spreading Calipers: Oileanach
**A’ tighinn a dh’aithghearr!**
$99.00
Corp agus sgèile air a innealachadh bho 1.5mm tiugh 316 stàilinn airson seasmhachd agus sàbhaladh
Clàr-amais dèanta de umha nèibhi innealta
Ceangalaichean air an daingneachadh le sguaban alùmanum
Sgèile leusair air a shnaidheadh anns na h-aon àrdachaidhean ris an caliper sgaoilidh àbhaisteach le eadar-shuidheachadh gu cruinneas .5mm comasach
Gu math seasmhach agus mairidh e bliadhnaichean de dhroch dhìol san obair-lann.
CHAN EIL Cùis Spreading Caliper a’ freagairt air Caliper Spreading Oileanach
Tha a h-uile Caliper air a calibratadh agus air a sgrùdadh a’ cleachdadh an aon dòigh ris na calipers sgaoilidh àbhaisteach.
ASME àbhaisteach.
Ma thèid gàirdeanan a chromadh a-riamh, tha e glè fhurasta an toirt air ais gu còmhnard. Ma tha coltas gu bheil iad air am milleadh nas fhaide na an comas dhut a chàradh, cuir thugam iad agus cuiridh mi ceart e an-asgaidh ma ghabhas e dèanamh.
$99.00
Corp agus sgèile air a innealachadh bho 1.5mm tiugh 316 stàilinn airson seasmhachd agus sàbhaladh
Clàr-amais dèanta de umha nèibhi innealta
Ceangalaichean air an daingneachadh le sguaban alùmanum
Sgèile leusair air a shnaidheadh anns na h-aon àrdachaidhean ris an caliper sgaoilidh àbhaisteach le eadar-shuidheachadh gu cruinneas .5mm comasach
Gu math seasmhach agus mairidh e bliadhnaichean de dhroch dhìol san obair-lann.
CHAN EIL Cùis Spreading Caliper a’ freagairt air Caliper Spreading Oileanach
Tha a h-uile Caliper air a calibratadh agus air a sgrùdadh a’ cleachdadh an aon dòigh ris na calipers sgaoilidh àbhaisteach.
ASME àbhaisteach.
Ma thèid gàirdeanan a chromadh a-riamh, tha e glè fhurasta an toirt air ais gu còmhnard. Ma tha coltas gu bheil iad air am milleadh nas fhaide na an comas dhut a chàradh, cuir thugam iad agus cuiridh mi ceart e an-asgaidh ma ghabhas e dèanamh.
bottom of page